CAST STEEL – Gate Valve
 Description/ Descripción:
2″-24″ ANSI B16.5; 26″ -48″ ANSI B16.47 150lb-2500lb API-600 ANSI B16.34
Test & Inspection: API-598 API-600 ANSI B16.34
Test & Inspection: API-598 API-600 ANSI B16.34
Test & Inspection: API-598
Catálogo en formato PDF
|
|
Design features
Bolted Bonnet or Pressure Seal Bonnet
Outside Stem & Yoke or Non-rising Stem
Renewable Seat Rings welded or threaded
Low Emission Graphite Gland Packing
Integral actuator mounting pad (ISO 5211)
Fire Safe Design
B.W. End: ANSI B16.25
|
Specifications
Test & Inspection: API-598
Basic Design: API-600, ANSI B16.34
Face to Face: ANSI B16.10
End Flange: 2"-24" – ANSI B16.5
26"-48" ANSI B16.47
B.W. End: ANSI B16.25
By-Pass and Drain Connections
Indicator and Locking Devices
Extensions Shaft for Remote Operation
Live Load Packing Gland, Inconel Packing
|
Optional features
Manufacturing to NACE MR-01-75-LE
Cast Steel, Alloy Steel, Stainless Steel
Bonnet Extension for Cryogenic Service
Seal Welded or threaded Seats Across Full Range
Flanged or Butt Welded Ends
Resillient Soft Seats for Positive Shut-off
Pressure Seal Bonnet
Double Block and Bleed Option
By-Pass and Drain Connections
Indicator and Locking Devices
Extensions Shaft for Remote Operation
Live Load Packing Gland, Inconel Packing
|
|
CAST STEEL – Conduit Gate Valve
 Description:
2"-40" ANSI B16.5; 26" -36" ANSI B16.47 150lb-2500lb API 6D, API 594, BS1868, ANSI B16.34
Test & Inspection: API-598, API 6D API-6D, BS1868, ANSI B16.34
|
|
Design features
Fully piggable
Soft or Metal to Metal Sealing
Fire safe Design
Block and Bleed feature
Drain and Grease
Integral actuator mounting pad (ISO 5211
|
Specifications
Test & Inspection: API-6D
Basic Design: API-600, ANSI B16.34
Face to Face: ANSI B16.10
End Flange: 2"-24" – ANSI B16.5
26"-40" ANSI B16.47
B.W. End: ANSI B16.25
|
Optional features
Manufacturing to NACE Mr-01-75-LE Cast Steel, Alloy Steel, Stainless Steel
Flanged or Buttweld Ends
Low Flow Coefficient
Soft Seal or Metal to Metal Seal
Bypass relief system available upon request
Extension Shaft for Remote Operation
|
|
CAST STEEL – Globe Ball
 Description:
2"-36" ANSI B16.5; 26" -36" ANSI B16.47 150lb-2500lb BS1873 ANSI B16.34
Test & Inspection: API-598 BS1873 ANSI B16.34
Test & Inspection: API-598 BS1873 ANSI B16.34
Test & Inspection: API-598
|
|
Design features
Bolted Bonnet or Pressure Seal Bonnet
Outside Stem & Yoke or Non-rising Stem
Plug Disc with Contoured Spherical Seating Area
Low Emission Graphite Gland Packing
Integral Actuator Mounting Pad (ISO 5211)
Fire Safe Design
|
Specifications
Test & Inspection: API-598
Basic Design: BS1873, ANSI B16.34
Face to Face: ANSI B16.10
End Flange: 2"-24" – ANSI B16.5
26"-36" ANSI B16.47
B.W. End: ANSI B16.25
|
Optional features
Manufacturing to NACE MR-01-75-LE
Cast Steel, Alloy Steel, Stainless Steel
Seal Welded or threaded Seats Across Full Range
Flanged or Butt Welded Ends
Stop-Check or Screw Non-Return
Guided Disc for Use in Vertical Pipelines
Bonnet Extension for Cryogenic Service
By-Pass and Drain Connections
Locking Devices
Extension Shaft for Remote Operation
Pressure Seal Bonnet
|
|
CAST STEEL – Check Valve
 Description:
2″-40″ ANSI B16.5; 26″ -36″ ANSI B16.47 150lb-2500lb API 6D, ANSI B16.34
Test & Inspection: API 6D API-6D, ANSI B16.34
|
|
Design features
Bolted Bonnet or Pressure Seal Bonnet
Low Pressure Drop Design
Swing Disc
Low Emission Gasket
Fire Safe Design
Metal or Soft Seat
|
Specifications
Test & Inspection: API-598, API6D
Basic Design: API-6D, BS1868,API 594, ANSI B16.34
Face to Face: ANSI B16.10
Size: 2"-24"-ANSI B16.5
26"-40" ANSI B16.47
|
Optional features
Manufacturing to NACE Mr-01-75-LE
Cast Steel, Alloy Steel, Stainless Steel
Seal Welded or threaded Seats Across Full Range
Outside Lever and Weight Arrangement
By-Pass and Drain Connections
Damping Devices
Metal or soft Seat
|
|
CAST STEEL – Wafer Check Valve
 Description:
2″- 36″ 150lb-2500lb
|
|
Design features
Wafer Type or Lug Type
Metal to Metal Seats, Soft Seats
Long-life Spring
|
Specifications
Basic Design: API-594
Face to Face: API-594
Test & Inspection: API-598
End Connection: ANSI B16.5, ANSI B16.47
|
Optional features
Cast Steel, Alloy Steel, Stainless Steel
Manufacturing to NACE MR0175 upon request
|
|
BALL VALVE – Trunnion Mounted
 Description:
2″-56″ 150lb-2500lb, 3000-15000psi API-6D, ANSI B16.34 API-6D, ANSI B16.34
Catálogo en formato PDF
|
|
Design features
Double Block & Bleed
Blow-out proof Stem
Piggable
Self Cavity Pressure Relief
API6FA Fire Safe Tested
Emergency Sealant Injections
Anti-static Device
Low Emission
NACE MR-01-75 Compliance
ISO Mounting Pads
Locking Device
|
Specifications
Test & Inspection: API 6D. ANSI B16.34
Basic Design: API 6D
Face to Face: API 6D
End Flange: 2"-24" – ANSI B16.5
26"-56" ANSI B16.47
B.W. End: ANSI B16.25
|
Optional features
Various Soft seat materials available
Metal Seated
Cast Steel, Alloy Steel, Stainless Steel
Flanged or Buttweld Ends, GaryLock Clamp Ends
Bypass relief system available upon request
Extension Shaft for Remote Operation or Underground Service
Transition Pup
Double Piston Effect
Fully Welded Body
Electrical and Pneumatic, Hydraulic Actuated
Manufacturing to NACE MR0175 upon request
|
|
BALL VALVE – Top / Entry Ball Valve
 Description:
2″-30″ 150lb-2500lb API-6D, ANSI B16.34
|
|
Design features
Easy In Line Maintenance
Double Block & Bleed
Blow-Out Proof Stem
Piggable
Self Cavity Pressure Relief
API6FA Fire Safe Tested
Emergency Sealant Injections
Anti-static Device
Low Emission
NACE MR-01-75 Compliance
ISO Mounting Pads
Locking Device
|
Specifications
Test & Inspection: API 6D. ANSI B16.34
Basic Design: API 6D
Face to Face: API 6D
End Flange: 2"-24" – ANSI B16.5
26"-36" ANSI B16.47
B.W. End: ANSI B16.25
End Flange: ANSI B16.5
|
Optional features
Various Soft seat materials available
Metal Seated
Cast Steel, Alloy Steel, Stainless Steel
Flanged Ends or Buttwelding Ends, Gary Lock Clamp Ends
Bypass relief system available upon request
Extension Shaft for Remote Operation or Underground Service
Transition Pup
Double Piston Effect
Fully Welded Body
Electrical and Pneumatic, Hydraulic Actuated
Manufacturing to NACE MR0175 upon request
|
|
BALL VALVE – Floating Ball Valve
 Description:
1/2″ to 12″ 150lb-300lb 1/2″ to 4″ 600lb 3/4″ to 2″ 900/1500lb
|
|
Design features
API607/6FA Fire Safe Tested
Locking Device
Anti-static Device
Blow-out proof stem
Low Emission
1/2"-6" Lever Operation
8"-12" Optional Gear Operation
ISO Mounting Pads
|
Specifications
Test & Inspection: API 598. ANSI B16.34
Basic Design: API 608, ANSI B16.34, ISO 17292
Face to Face: ANSI B16.10
End Flange: ANSI B16.5
B.W. End: ANSI B16.25
|
Optional features
Various Soft seat materials available
Metal Seated
Cast Steel, Alloy Steel, Stainless Steel
Flanged or ButtweldEnds
Fully Welded Body
Electrical and Pneumatic, Hydraulic Actuated
Manufacturing to NACE MR0175 upon request
|
|
BALL VALVE – Rising Stern Ball Valv
 Description:
2″ – 30″ 150lb-1500lb
|
|
Design features
One Piece Body
Top Entry
Rising Stem Design
Downstream Seal
Low Torque, Low Emission
Long Service Life
|
Specifications
Test & Inspection: API 598. ANSI 6D
Basic Design: API 6D, ANSI B16.34
Face to Face: DHV Standard, ANSI B16.10
End Flange: ANSI B16.5
B.W. End: ANSI B16.25
End Flange: ANSI B16.5
ANSI: B1634, API-6D
Test & Inspection: API598, API6D
|
Optional features
Cast Steel, Alloy Steel, Stainless Steel
Full or Reduce Bore
Actuation available, ISO pad upon request
Locking Device upon request
Manufacturing to NACE MR0175 upon request
|
|
BALL VALVE – Small Size Ball Valve 1PC
 Description:
1/4″-2″ 2000 WOG
|
|
Design features
Anti-static Device
Blow-out proof stem
Low Emission
|
Specifications
WOG Floating Ball
End to End: DHV Standard
Thread End: ANSI B2.1 NPT
Socket Weld End: ANSI B16.11
B.W. End: ANSI B16.25
|
Optional features
Various Soft seat materials available
Bar Stock Body material
Locking Device upon request
Manufacturing to NACE MR0175 upon request
|
|
BALL VALVE – Small Size Ball Valve 2PC
 Description:
1/4″-2″ 1000/2000psi WOG
|
|
Design features
Anti-static Device
Blow-out proof stem
Low Emission
|
Specifications
WOG Floating Ball
End to End: DHV Standard
Thread End: ANSI B2.1 NPT
Socket Weld End: ANSI B16.11
B.W. End: ANSI B16.25
|
Optional features
Various Soft seat materials available
Bar Stock Body material
Locking Device upon request
Manufacturing to NACE MR0175 upon request
|
|
BALL VALVE – Small Size Ball Valve
 Description:
1/4"-2" 1000/2000psi WOG
|
|
Design features
Anti-static Device
Blow-out proof stem
Low Emission
|
Specifications
WOG Floating Ball
End to End: DHV Standard
Thread End: ANSI B2.1 NPT
Socket Weld End: ANSI B16.11
B.W. End: ANSI B16.25
|
Optional features
Various Soft seat materials available
Bar Stock Body material
Locking Device upon request
Manufacturing to NACE MR0175 upon request
|
|
FORGED STEEL VALVES – Gate Valves
 Description:
1/2″-2″ 150lb-2500lb
Catálogo en formato PDF |
|
Design features
Outside Screw and Yoke(OS&Y)
Two Piece self aligning packing gland
Bolted bonnet with spiral-wound gasket
Integral backseat
|
Specifications
Basic Design: API 602, ANSI B16.34
End to End: DHV Standard
Test & Inspection: API-598
Screwed Ends (NPT) to ANSI/ASME B1.20.1
Socket weld Ends to ASME B16.11
Butt weld Ends to ASME B16.25
End Flange: ANSI B16.5
|
Optional features
Cast Steel, Alloy Steel, Stainless Steel
Full Port or Regular Port
Extended Stem or Below Seal
Welded Bonnet or Pressure Seal Bonnet
Locking Device upon request
Manufacturing to NACE MR0175 upon request
|
|
FORGED STEEL VALVES – Globe Valves
 Description:
1/2″-2″ 150lb-2500lb
|
|
Design features
Outside Screw and Yoke(OS&Y)
Two Piece self aligning packing gland
Bolted bonnet with spiral-wound gasket
Integral backseat
|
Specifications
Basic Design: API 602, ANSI B16/34
End to End: DHV Standard
Test & Inspection: API-598
Screwed Ends (NPT) to ANSI/ASME B1.20.1
Socket weld Ends to ASME B16.11
Butt weld Ends to ASME B16.25
End Flange: ANSI B16.5
|
Optional features
Cast Steel, Alloy Steel, Stainless Steel
Y-Pattern
Full Port or Regular Port
Extended Stem or Below Seal
Welded Bonnet or Pressure Seal Bonnet
Locking Device upon request
Manufacturing to NACE MR0175 upon request
|
|
FORGED STEEL VALVES – Check Valves
 Description:
1/2″-2″ 150lb-2500lb
|
|
Design features
Bolted bonnet with spiral-wound gasket
Lift or Piston Check
Ball check
Swing check
|
Specifications
Basic Design: API 602, ANSI B16.34
End to End: DHV Standard
Test & Inspection: API-598
Screwed Ends (NPT) to ANSI/ASME B1.20.1
Socket weld Ends to ASME B16.11
Butt weld Ends to ASME B16.25
End Flange: ANSI B16.5
|
Optional features
Cast Steel, Alloy Steel, Stainless Steel
Full Port or Regular Port
Welded Bonnet or Pressure Seal Bonnet
Manufacturing to NACE MR0175 upon request
|